How To Troubleshoot Scale Problems in Montana

Are you wondering how to troubleshoot truck scale issues? Performance problems can arise of any type, no matter the type of machine or equipment you own. The same applies to truck scales. This guide will inform you of many common issues associated with truck scales and tips for troubleshooting them.

Common Truck Scale Issues & Troubleshooting Tips

Truck scale troubleshoot issues are common. Here are some common issues with truck scales and ways you can troubleshoot them.

Water Buildup & Debris

With truck scales comes the accumulation of debris and dirt under the scale. The accumulation of these things can impact the way the truck scale performs. As a result, you will be given inaccurate or false readings.

The best way to troubleshoot this problem is to ensure that the bottom of the scale is clean. You can do this at least twice a year, depending on the type of environment you reside in. For example, if you are in an environment with a lot of asphalt companies or rock quarries, you may want to consider cleaning the bottom of your scale four times a year.

In addition, you may want to perform a weekly check as well to ensure the scale is working correctly.

False Scale Readings

If you own a truck scale, you may commonly get false or inaccurate readings. If this is the case, it can impact the measurements every time. Depending on how well you maintain your truck scale, the lifespan can be significantly reduced. Scale calibrations can help keep your scale in good working condition.

The best way to ensure that you receive accurate scale readings each and every time is to make sure that drivers slowly drive onto the scale to prevent significant fluctuations in weight. Also, be sure that the scale zeros out in between each reading. It is also helpful to check under the scale for any buildup of debris. If you do happen to notice any, you can power wash them away.

Additionally, you should check the areas around the load cell and cables to make sure that everything is properly connected.

Electrical Problems

Scales consist of various components. These components can have a huge impact on the way any scale operates. Many problems can occur inside the scale indicators. Electrical problems can have an impact on the way the scale operates and even cause false readings.

Lightning strikes can even cause electrical issues as well, such as power surges. These surges can affect performance. The best solution is to check all accessories, scale installation, and load cells to ensure they are properly grounded. Don’t forget to check junction boxes for the accumulation of moisture and to ensure they are dry and sealed. To protect against lightning strikes, aim for lighting protection for the load cells and scale.

Damaged Cells

Electrical issues and the accumulation of moisture can all have an effect on the load cells. The best way to ensure that you don’t receive any errors is by avoiding placing the scale next to landscaping or construction. Always perform test measurements in between weights and ensure that all ground connections are firmly connected.

Categorised in: Truck Scales

This post was written by admin